Equipment

    NavVis VLX 3: the scanner behind most ZEALOT projects

    A wearable mobile mapping system that captures a building at walking pace. This page quotes the manufacturer's data sheet rather than paraphrasing it, then explains what each figure means for your project and where a tripod scanner still earns its place.

    Specifications quoted from the NavVis VLX 3 data sheet ().

    NavVis VLX 3 wearable mobile mapping system

    What it is

    The VLX 3 is a wearable scanner: two laser scanning heads and four cameras on a frame the operator carries through the building, with simultaneous localization and mapping (SLAM) software stitching the walk into a single point cloud. There is no tripod to set up and move, so corridors, stairs and occupied floors are captured continuously instead of station by station.

    That is why field time on a commercial interior is measured in hours: an operator walks every room once, the system records geometry and imagery together, and registration happens in software afterwards rather than one setup at a time on site.

    Manufacturer specifications

    Quoted from the NavVis VLX 3 data sheet. These are the instrument's tested figures under the conditions the manufacturer states, not a promise about a particular building.

    Manufacturer specifications
    SpecificationData sheet value
    Point cloud accuracy5 mm in a dedicated 500 m² test environment (1 sigma)
    Laser scanners2 × 32-layer, 903 nm
    Point rate2 × 1,280,000 points per second
    Laser rangeUp to 50 m operational; up to 300 m raw
    Cameras4 × 20 megapixel fisheye
    Weight8.5 kg (device)
    Battery life1.5 hours with one set of 2 batteries
    Storage1 TB portable SSD
    Ingress protectionIP42
    Operating temperature0°C to 40°C

    Accuracy statements on the data sheet are 1 sigma. Absolute accuracy over a whole building depends on the size of the environment and on control points, which is exactly what our registration process adds. the NavVis VLX 3 data sheet

    What that means on your project

    The data sheet describes the instrument. These are the figures ZEALOT delivers with it, the same ones published across this site.

    ±5mm registered point cloud

    The delivered cloud is registered and checked against control on site, so the data sheet's instrument accuracy becomes a building-wide figure you can specify. Residuals are reported, not assumed.

    80,000–120,000 sq ft per field day

    Walking-pace capture in open-to-moderate density interiors. Dense mechanical spaces, above-ceiling work and escorted access move a project toward the low end; open floor plates toward the high end.

    Registered point cloud in 3–5 business days

    Processing, registration, QA and colorization after the last field day, delivered in E57, RCP, LAS or PTS, with Revit models and 2D drawings scoped separately.

    Imagery with the geometry

    The four cameras record panoramic imagery as the operator walks, so the point cloud can be browsed with photographs of every space alongside it.

    When a tripod scanner is used instead

    Terrestrial (tripod) laser scanning still has a role. Where a specification calls for ties to survey control or state plane coordinates, or where a zone needs a dense static capture, a tripod scanner captures those areas and the two datasets are registered into one point cloud.

    Choosing the method is part of scoping, not a preference: the wearable system sets the field-time economics for most buildings, and the tripod covers the zones that genuinely need it.

    Questions about the scanner

    What buyers ask when they see a wearable scanner instead of a tripod.

    Is the data sheet's 5 mm the same as the ±5mm you quote?
    Not quite, and the difference matters. The data sheet figure is the instrument's tested accuracy under the manufacturer's stated conditions. The ±5mm we quote is the registered point cloud we deliver, checked against control on your building; on larger or more complex sites that includes survey control ties so the figure holds across the whole footprint.
    How much can it capture in a day?
    80,000–120,000 sq ft per field day in open-to-moderate density interiors. Density and access move that more than square footage does: an open warehouse scans near the top of the range, a corridor-heavy medical office with above-ceiling capture near the bottom.
    Does a wearable scanner disrupt an occupied building?
    Minimally. Capture is a walk-through at normal walking pace with no tripods blocking corridors, and the on-site phase for most buildings is a single day. Hospitals, schools and active plants are commonly scanned in off-hours windows.
    Do you still use a tripod scanner?
    Yes, where the specification calls for survey control ties or a zone needs a dense static capture. The tripod data is registered into the same point cloud, so you receive one dataset, not two.
    What formats do you deliver from it?
    Registered point clouds in E57, RCP, LAS or PTS; Revit models at LOD 200–350; and 2D plans, sections and elevations in AutoCAD, each scoped and quoted as its own deliverable.

    See it on your building

    Tell us the building and the deliverable you need. We will say which method fits, and quote it within one business day.