How Much Does 3D Laser Scanning Cost?
Figures reviewed by Maxwell Seay
This is the pricing page most scanning companies don't publish. It covers what field capture and a registered point cloud cost per square foot, why one building lands at the bottom of the band and another at the top, how quotes are structured, what a floor plan or Revit model adds, and what to put in a request for quote so bids come back comparable. Every figure below is the one we quote to.
Short answer: Most commercial buildings scan for $0.05–$0.20 per square foot for capture and a registered point cloud — a typical 50,000 sq ft building runs $2,500–$10,000. Small projects price at a $1,500–$3,500 minimum. Site access is the biggest lever. Floor plans (+$0.04–$0.12/sq ft) and Revit models (+$0.10–$1.75/sq ft) are separate line items on top.
The scanning band: $0.05–$0.20 per square foot
Pricing scales with how hard the space is to move through and capture — not with the prestige of the building. An open warehouse you can walk end to end scans fast. A mechanical penthouse with escorted access and above-ceiling work does not. Everything on this page sits inside the same band.
The band covers field capture with mobile LiDAR at ±5mm registered accuracy, registration and QA, colorization, and delivery of the point cloud in E57, RCP, LAS or PTS. It does not cover drawings or models; those are priced separately and covered further down.
Cost per square foot by building type
Where a project lands in the band is mostly a function of density and access. These rows are the ranges we work to for typical commercial buildings.
| Building type | Typical cost per sq ft | 50,000 sq ft example |
|---|---|---|
| Warehouse / open big-box | $0.05–$0.08 | $2,500–$4,000 |
| Building exteriors / facades only | $0.05–$0.09 | $2,500–$4,500 |
| Office / retail / multifamily | $0.06–$0.12 | $3,000–$6,000 |
| Schools, hospitals, labs | $0.10–$0.16 | $5,000–$8,000 |
| Historic / ornate structures | $0.12–$0.20 | $6,000–$10,000 |
| Industrial / process plants (MEP-dense) | $0.12–$0.20 | $6,000–$10,000 |
Small projects rarely follow the per-square-foot math. Below roughly 10,000–15,000 sq ft, mobilization, travel, registration and QA dominate the cost, which is why minimum project fees of $1,500–$3,500 are standard across the industry. Scanning a 2,000 sq ft restaurant does not cost $200; it costs the minimum.
What moves a scanning quote up or down
Seven factors explain most of the spread in the table above.
1.Site access conditions
The biggest single lever. A building you can walk freely during business hours sits at the bottom of the range. Off-hours or phased scanning of occupied hospitals, schools and data centers adds mobilizations, and escorts, badging, confined spaces and safety training all add billable time. The same square footage can price at either end of the band on access alone.
2.Deliverable type
The per-square-foot rate covers capture and a registered point cloud. Floor plans, CAD drawings and Revit models are priced separately on top — decide what you actually need before comparing quotes.
3.Cloud-hosted viewing
Browser-based point cloud and 360° panorama access for the whole team, with no Revit or ReCap seats required, is an add-on with an ongoing hosting component rather than a one-time cost. Worth it when many stakeholders need the data; skippable when one modeler consumes it.
4.Total square footage
Unit prices fall as area rises. A 300,000 sq ft distribution center prices near the bottom of the band while a 5,000 sq ft clinic prices at the project minimum.
5.Density and complexity
Exposed MEP, above-ceiling capture, racking, equipment and tight mechanical rooms all add scan positions and processing time. Above-ceiling scanning alone (lifting tiles, scanning the plenum) can add 20–50% to a project.
6.Accuracy and control requirements
Standard mobile-LiDAR capture at ±5mm covers most architectural work. Projects requiring survey control ties, state plane coordinates or tighter tolerances add surveyor time and cost — often $1,000–$3,000 per site.
7.Travel and scope
Interior only, interior plus exterior, roof and below-grade areas each add area and access complexity. We include travel within our Ohio and Midwest service radius; beyond that expect mobilization fees of $500–$2,500 depending on distance and crew size.
How scanning fees are structured
Quotes arrive in three formats. All three should converge on similar totals for the same scope; the format mainly changes who carries the risk of an inaccurate area estimate.
| Fee structure | Typical range | When it is used |
|---|---|---|
| Per square foot | $0.05–$0.20/sq ft | Standard for defined buildings with known area |
| Day rate (crew + equipment) | $2,500–$5,000/day | Open-ended scopes, campuses, phased capture |
| Fixed project fee | $1,500 minimum and up | Small projects, repeat clients, defined deliverable specs |
Sample scanning budgets
Three representative budgets, scanning and point cloud delivery only.
12,000 sq ft retail building, interior + exterior
One field day, registered colorized point cloud in RCP and E57, panoramic imagery.
80,000 sq ft office building, interiors of all floors
One to two field days with a mobile scanner, registered point cloud, cloud-hosted viewer access.
150,000 sq ft industrial plant, MEP-dense, with survey control
Three to five field days, control network tied to plant coordinates, full-dress point cloud deliverable.
What each deliverable costs and when it arrives
The scan itself is often the smaller half of a documentation budget. What you ask for from the point cloud drives the rest.
| Deliverable | What you get | Typical timeline | Pricing basis |
|---|---|---|---|
| Registered point cloud | Colorized cloud in E57, RCP, LAS or PTS, registered to ±5mm; the base scope every other deliverable is built from. | 3–5 business days after capture for a typical single building; larger captures follow the size table below | $0.05–$0.20/sq ft; $1,500–$3,500 minimum |
| 2D floor plans and elevations (DWG/PDF) | Plans, sections and elevations traced from the cloud in AutoCAD, at the detail level the project needs. | 1–3 weeks for most single buildings | Adds $0.04–$0.12/sq ft depending on detail level |
| Revit model (RVT) | Architecture, structure and MEP at the LOD specified per discipline; model faces within ±10mm of the cloud at LOD 300, ±6mm at LOD 400. | LOD 200 in 10–15 business days for ~100,000 sq ft; LOD 300 in 3–5 weeks | Adds $0.10–$1.75/sq ft depending on LOD and disciplines |
| Cloud-hosted viewer | Browser access to the point cloud and 360° panoramas for the whole team, no software seats required. | Preview within a day or two of scan day | Add-on with an ongoing hosting component |
If your design team can work directly in a point cloud, ordering the scan alone and modeling only what the project needs is the cheapest path. If they need drawings or BIM, get the whole package quoted together — bundled scan-plus-model pricing is usually 10–15% below buying the two separately.
Timeline by building size
Mobile LiDAR capture of interiors at typical commercial density, point cloud delivery in E57/RCP, and, in the last column, a Revit model at LOD 200–300 for architecture and structure. Use it to sanity-check proposals, not to replace one.
| Building size | Typical example | On-site capture | Point cloud delivered | Add for Revit model |
|---|---|---|---|---|
| Under 10,000 sq ft | Restaurant, clinic, small retail | Half day | 2–5 business days | +1–3 weeks |
| 10,000–50,000 sq ft | Tenant space, school wing, church | Half to 1 day | 3–7 business days | +2–4 weeks |
| 50,000–150,000 sq ft | Office building, hospital wing | 1–2 days | 5–10 business days | +3–6 weeks |
| 150,000–500,000 sq ft | Distribution center, industrial plant | 2–6 days | 7–15 business days | +4–8 weeks |
| 500,000+ sq ft / multi-building | University campus, corporate portfolio | Phased over 1–3 weeks | Rolling, per building | Phased, per building |
What a Revit model adds: scan-to-BIM pricing
Scan-to-BIM is two scopes on one invoice: field capture (the band above) and modeling labor, which prices by how much a technician must trace, classify and parameterize from the point cloud. All-in, most US commercial projects land at $0.35–$2.00 per square foot, driven almost entirely by Level of Development and discipline count.
| Modeling scope | Modeling cost per sq ft | What you get |
|---|---|---|
| LOD 200, architectural shell | $0.10–$0.25 | Generic walls, floors, roofs, openings; approximate geometry for planning and massing |
| LOD 300, architecture + structure | $0.25–$0.55 | Accurate size/location of walls, doors, windows, columns, framing; design-ready baseline |
| LOD 300, all disciplines (arch/struct/MEP) | $0.45–$0.90 | Adds ductwork, piping, conduit, equipment at design-level accuracy |
| LOD 350, MEP-dense, all disciplines | $0.75–$1.75 | Interfaces between systems modeled; hangers, connections; clash-detection ready |
Add scanning ($0.05–$0.20 per sq ft for typical commercial buildings) to get the delivered price. If you already own a usable point cloud, we model from supplied RCP or E57 data and you pay the modeling column only. Minimum project fees apply here too — commonly $2,500–$5,000 for a scan-plus-model engagement.
Modeling cost is labor, and LOD multiplies labor twice: more elements, and more decisions per element. Specify the lowest LOD that supports the decision the model must inform, and specify it per discipline — LOD 300 architecture with LOD 200 structure and no MEP is a legitimate, and much cheaper, spec than "LOD 300 everything."
15,000 sq ft retail bank branch
LOD 300 architectural, no MEP
50,000 sq ft office renovation
LOD 300 architecture + structure
200,000 sq ft plant, MEP retrofit
LOD 350 all disciplines, above-ceiling capture
What the per-square-foot rate does not include
The most common source of confusion between two quotes is scope, not price. These items are always separate line items, and a quote that is silent on them is not comparable to one that prices them.
- Drawings and models
- 2D plans, CAD and Revit are priced per deliverable on top of the scan. See the deliverables table above.
- Survey control
- Ties to state plane coordinates or a site control network add surveyor time, often $1,000–$3,000 per site.
- Custom Revit families
- Non-standard equipment — process gear, custom air handlers, legacy switchgear — needs purpose-built families, typically $150–$500 per family.
- Mobilization beyond the service radius
- Projects outside driving distance of Powell, Ohio carry a mobilization line of $500–$2,500 depending on distance and crew size.
- Ongoing cloud hosting
- Hosted viewing is a recurring cost, not part of the one-time capture fee.
How to keep scanning costs down
Scope tightly
Scan the areas the project touches, not the whole facility. Above-ceiling capture only where design work happens overhead.
Provide clean access
Unlocked rooms, cleared corridors and a single mobilization keep field time — the most expensive line item — to a minimum.
Skip survey control unless a stakeholder requires it
Relative accuracy of ±5mm is sufficient for most renovation design.
Write a deliverable spec before requesting quotes
Vague RFQs get padded quotes. Specific ones get sharp numbers and comparable bids.
Ask about return-client or multi-building rates
Portfolio and campus programs routinely price 15–25% below one-off projects.
What to put in your request for quote
Four quotes for "a scan of our building" will scatter because each provider assumes a different scope. Fix the scope and the quotes converge. State:
- Area and building type, with floor plans or photos if available
- Areas in scope: interior, exterior, roof, below-grade, above-ceiling
- Access conditions: occupied or vacant, hours available, escort or badging requirements
- Deliverables: point cloud formats (RCP/E57), 2D extractions (DWG), Revit version
- LOD per discipline if a model is in scope, using AIA/BIMForum LOD definitions
- Accuracy tolerance, and whether survey control ties or a deviation report are required
- Template requirements: your Revit template and standards, or the provider's
Send us that list and we return a fixed-price quote within one business day, with mobilization already accounted for.
Pricing questions we get asked
Straight answers to the questions that arrive with almost every quote request.
- How much does 3D laser scanning cost per square foot?
- Most commercial buildings run $0.05 to $0.20 per square foot for scanning and a registered point cloud. Open warehouses sit at the bottom of that band and historic or MEP-dense industrial buildings at the top, with site access conditions the single biggest driver of where a given job lands.
- Does the per-square-foot price include a Revit model?
- No. The per-square-foot rate covers field capture and a registered point cloud. Floor plans, CAD drawings and Revit models are priced separately on top — typically $0.04–$0.12 per sq ft for 2D plans and $0.10–$1.75 per sq ft for a Revit model depending on LOD and disciplines.
- What is the minimum cost for a small building?
- Below roughly 10,000–15,000 sq ft, mobilization, registration and QA dominate the cost, so minimum project fees of $1,500–$3,500 are standard for scanning and $2,500–$5,000 for a scan-plus-model engagement. A 2,000 sq ft restaurant costs the minimum, not the per-square-foot math.
- What makes one scanning quote higher than another for the same building?
- Site access, more than anything else. A building you can walk freely during business hours prices at the bottom of the range, while off-hours windows, escorts, badging and above-ceiling capture all add billable field time. Deliverable scope and whether you want cloud-hosted point cloud viewing are the other two levers.
- Is a day rate or a per-square-foot rate better?
- They should converge on similar totals for the same scope. A per-square-foot quote ($0.05–$0.20/sq ft) protects the buyer when the building is bigger than the drawings suggest; a day rate ($2,500–$5,000/day) protects the provider when access is uncertain. For most single-building projects a fixed fee tied to a written deliverable spec is the cleanest arrangement.
- How long until I have the files?
- Most commercial buildings are captured on site in one to two days at 80,000–120,000 sq ft per field day. The registered point cloud ships 3–5 business days after capture for a typical single building (larger, multi-day captures take longer; see the size table), and a Revit model adds weeks depending on scope — a LOD 300 architecture and structure model for a 50,000 sq ft office typically takes 3–5 weeks.
- Do you charge for travel in Ohio?
- Travel within our Ohio and Midwest service radius is included in the quote; every major Ohio metro is a same-day round trip from our Powell office. Projects beyond that radius carry a mobilization line of $500–$2,500 depending on distance and crew size, and we scan nationwide.
Go deeper
- How much does 3D laser scanning cost in 2026? (full article)
- Scan-to-BIM pricing: what a Revit model really costs
- How long does it take to laser scan a building?
- LOD 200 vs 300 vs 400 for Revit models from scans
- How to write a 3D scan deliverable spec
- Building 3D laser scanning service
- Scan-to-BIM service
- Ohio and Midwest coverage and drive times
Get a fixed-price quote for your building
Tell us the building, the square footage and the deliverable you need. We quote within one business day, with mobilization already accounted for.